Product parameter:
Material:
Cover: PBT plastic
(red or blue)
Base: PBT plastic
(black)
Operator: POM
plastic (white)
Stock: epoxy resin
potting
Terminal: tin
plated phosphor bronze, contact gold plated 3u"
Sealing tape:
polyimide KAPTON
Switching
Characteristics:
Switch Capacity:
25mA at 24VDC
Insulation
Resistance:100MΩ at 250VDC
Contact
Resistance: 50mΩ max.
Insulation
strength: 500VAC / 1min
Operation Force :
1000gf max.
Electrical life:
2000 times
Operation
Temp:-20ºC~+70ºC
Welding
requirements:
Manual welding:
320 degrees C no more than 2 seconds. (30 watt iron max.)
Wave soldering:
260 degrees C no more than 5 seconds, in the welding and cleaning process
switch is open state.
Applications
1.Electronic
Devices Configuration
2.PCB Prototyping
and Development
3.Embedded Systems
4.Consumer
Electronics
Features
-Configuration:
SPST means each switch within the DIP package can connect one input to one
output.
-Package Type: Standard
DIP switches are usually housed in a rectangular plastic package with a row of
pins on either side for through-hole mounting on a PCB (Printed Circuit Board).
-Right Angle
Recessed Type: This refers to the orientation and design of the switch.
"Right angle" means the pins are mounted perpendicular to the body of
the switch, suitable for through-hole PCB mounting. "Recessed"
indicates that the switch body may be slightly inset or protected by the
housing, which can help prevent accidental actuation.
-Number of Pins:
DIP switches typically range from 1 to 12 pins. Each pin corresponds to a
separate switch contact.
Dimensions(Please refer to the
attached 2D drawings for detailed specifications.):
